Summer Workshop for Teachers 2012
in Dallas, Texas

"It's amazing how much a teacher can teach a student about testing and troubleshooting a vehicle's electrical and electronic system with just a DMM and a DC Current Clamp when the teacher has our hands-on troubleshooting training curriculum and knows how to teach it!
This workshop personally taught by Vince Fischelli

"The Art of Teaching Auto/Truck Electrical & Electronics Systems Troubleshooting"
Dates for 2013 to be announced.
Print out registration form.


 We are sending out a new Teacher's Newsletter this year by Email.
Send us an email to be added to our Teacher's Email list
to receive a notice for the Summer Workshop in 2011.
We no longer contact teachers by postal mail.

Curriculum of the Summer Workshop for Teachers
Cost is $1395.00 per Teacher
 Workshop Day 1:  Essential Electrical Troubleshooting Skills H-111A
Essential troubleshooting skills using the Starter Kit, H-111A. Material covers how electrical circuits work, how to test electrical circuits, how electrical circuits fail and how to troubleshoot electrical circuits. Teachers then practice troubleshooting up to 32 individual electrical problems and learn to insert problems in the Troubleshooting Trainers, H-PCB01 and H-PCB02 (H-111). Setting up troubleshooting training in the classroom is also covered for maximum benefit to students with minimum effort by the teacher.
 Workshop Day 2:  
Troubleshooting DC Motor Circuits H-113
More troubleshooting skill is developed troubleshooting brushless DC Motor Circuits using the Troubleshooting Trainer, H-PCB03 from H-113. Teachers practice troubleshooting DC Motor circuit electrical problems and learn to insert problems in the Troubleshooting Trainer, H-PCB03. Includes introduction to the various types of ohmmeters, their parameters, capabilities & limitations testing solid-state components and an introduction to key-off battery drain problems relating to DC motor circuit cooling fans. Later in Day 2 we will begin troubleshooting relays (Day 3 material) to make room in Day 3 to cover the new Troubleshooting Trainer H-PCB06, covering Wire Harness Troubleshooting.
 Workshop Day 3: Troubleshooting Relay Circuits H-115
Troubleshooting Relay Circuits using Troubleshooting Trainer H-PCB05 from H-115. Teachers troubleshoot live relay circuit problems including hard to find circuit failures, how relays cause key-off drain problems, how relays are controlled by shorts-to-voltage, etc and learn to insert problems in the Troubleshooting Trainer, H-PCB05.

Wire Harness Troubleshooting, H-116 (Overview)
A brief overview assembling and troubleshooting The Wire Harness Troubleshooting Trainer H-PCB06 from H-116. Teachers assemble a Mini-Electrical-System ("M.E.S." for short) combining all troubleshooting trainers together through the Wire Harness Troubleshooting Trainer and study unique electrical circuit problems relating to troubleshooting an electrical system.
 Workshop Day 4:  
Finish up H-116; Troubleshooting Batteries, unusual Battery Failures; How to troubleshoot a battery failure on the vehicle simply using a DMM and a DC Current Clamp as taught in Vince's new book -- "Vehicle Electrical Troubleshooting SHORTCUTS."
More about battery troubleshooting than you ever thought existed. For example, why is it sometimes impossible to jump start a vehicle with a dead battery and why you can jump start some vehicles but shouldn't.

Cranking circuits & practical cranking circuit troubleshooting on the vehicle simply using a DMM and a DC Current Clamp as taught in Vince's new book --
"Vehicle Electrical Troubleshooting SHORTCUTS."
Systematic troubleshooting procedures are explained for battery troubleshooting and cranking circuit troubleshooting, testing voltage drops, as well as, troubleshooting these circuits with hands-on practice using a DMM and DC Current Clamp.
 Workshop Day 5:  
Troubleshooting charging systems as taught in Vince's new book -- "Vehicle Electrical Troubleshooting SHORTCUTS."
Systematic troubleshooting procedure is presented that shows a technician how to test the charging system in 60 seconds using only a DMM. Also discussed are the incorrect ways to test the charging system currently being promoted by some manufacturers and what those methods don't work.

Teaching FIRST THINGS FIRST
A review of using FIRST THINGS FIRST and the FIRST THINGS FIRST School Presentation Package training program. How to use FIRST THINGS FIRST in the classroom to teach students how to test a vehicle's electrical system in 5-8 minutes and find electrical problems in the vehicle's primary electrical system. This includes a review of the FIRST THINGS FIRST School Presentation Package. Teachers then perform FIRST THINGS FIRST on a vehicle.

The final day concludes with a time for open discussion and critique as time permits.


 Return to the dedicated "Teachers" web page.

Print out registration form.

Information and Instructions for teachers planning to attend.
PLENTY OF HANDS-ON PRACTICE PROVIDED IN FIVE DAYS SO TEACHERS DEVELOP TROUBLESHOOTING SKILLS TO SUCCESSFULLY TEACH ELECTRICAL SYSTEM TROUBLESHOOTING TO THEIR STUDENTS.
All test equipment and troubleshooting trainers are provided.
Student manuals total over 550 pages including several step-by-step troubleshooting procedures to take back to the classroom and a copy of
"Vehicle Electrical Troubleshooting SHORTCUTS
and FIRST THINGS FIRST.
Class size limited.
Continental Breakfast provided by hotel.
Lunch included for first four days.
Check out the Guest Book on Veejer's web site and see what other teachers have to say about our hands-on teaching troubleshooting workshops!
 
Call 972-276-9642 to register by phone or fax a registration form which also shows cost to attend. If an answering machine records your call, leave a message and we will return your call as soon as possible. We suggest you leave your business and home phone number so we can contact you in the evening if our staff is on the road. Payment of the tuition in advance is required. As soon as tuition payment is received, or a copy of school purchase order, your seat is confirmed in your name and a confirmation letter is sent out with final instructions. There are two things to do after reserving a workshop seat.
(1) Airline Reservation: Book a flight ASAP after having confirmation to qualify for a reduced airfare. Include a Saturday night stay over (the Sat. night before) which can result in significant savings on some airfares. Students fly in to DFW Airport (Dallas-Fort Worth and take a SuperShuttle Van to the hotel (about $40.00 one way). If arriving at Love Field a SuperShuttle Van is also available. When you check in at the hotel, your training manual will be waiting for you at the front desk with a Welcome Letter covering last minute details about the class schedule and meeting room number. ASK FOR THEM! All workshop classes are held in the same hotel where you stay. SuperShuttle Vans will return you to the airport (about $40.00) for your return flight home.)
 

(2) Hotel Reservation:
We recommend you stay at the workshop hotel -
Fairfield Inn by Marriot
9230 LBJ Freeway, Dallas TX 75243. Call direct 972.437.9905 and mention you are attending Veejer Summer Workshop.
Ask for Veejer Enterprises's special rate of $69.00 + tax per night

Lunch for first four workshop days at local area restaurants is included in the workshop tuition. Students are responsible for their own evening meal.

CANCELLATION POLICY: If canceling more than 10 days before the first class day - 75% refund. If canceling in less than 10 days before the first class day - 50% refund. Canceling within 3 days before the workshop first day or failure to attend - NO REFUND.

Fax or mail your registration to us with payment to confirm your seat.
We accept school purchase orders to reserve your seat.
We will bill your school.


 Return to the dedicated "Teachers" web page.

Veejer Enterprises
3701 Lariat Lane, Garland, Texas 75042-5419
Phone:  972-276-9642
Fax:     972-276-8122
E-Mail Us:
  -->